Los Angeles Garage Door Repair, Installation and Maintenance
Garage doors have been made up of a lot of moving parts. The regular usage and repetitive movements and of the equipment leaves it malfunctioning and damaged. Garage door repair is not an easy job for anyone to do manually, even while treating a tiny malfunction. An alternative to keeping and repairing them in the best condition is to rent Los Angeles garage door repair services particularly for this. There are a lot of benefits of going to a professional company because they offer a wide range of services to make sure that your door is fixed in the most affordable cost without putting a dent in your pocket.
Common Garage Door Repair Problems Faced by Garage Owners
The Los Angeles garage door company also performs maintenance for the doors to keep them in the best of conditions for a longer period of time while minimizing the possibilities of damages. The most common problem faced by the garage owners are a rotten or damaged sections, broken spring, dents causing friction, jammed opener, sporadic movement, jerking movements, loud noises etc. Providers of garage door services will fix any of these common problems within no time. Moreover, they will take care of all the critical problems. These companies provide warranties on the maintenance jobs for giving customers a guarantee of reliability. It is important that you opt for services of an experienced Los Angeles garage door company for handling these tasks very efficiently.
Opt-in For Garage Door Services From an Experienced Los Angeles Company
An effectual and experienced company like this will ensure that the home garage door Los Angeles services replace your door with right ones, and perform it flawlessly. Los Angeles garage door spring replacement services repair bigger damages where replacement becomes mandatory. While replacing garage doors, you have numerous options ranging from one-sided wood garage doors, economical steel doors to customized carriage-style doors. In these cases, it is always vital to opt for professional services to manage the process of installation. It will even help you select from high quality equipments for your benefit.
Amazing Technicians for Los Angeles Commercial Garage Door Repairs
Homeowners will get the best service providers for garage door services. These services provide round the clock services; Los Angeles garage door repair have service technicians dispatched in various zones to serve their customers in a better timely fashion. Many of our service technicians have years of experience in this industry, and have also developed their own techniques for ensuring maximum efficiency. The customers can select from both, residential or commercial repairing services. To avail service of Los Angeles Garage Door Repair call (818) 650-9988 for immediate assistance or send us a Service Request.
Real Reviews From Real Customers in Los Angeles
Jul 26, 2016
Great service, great prices and all around great guys
Great service, great prices and all around great guys! We will definitely call Mike and team for any future garage door needs.
Jul 22, 2016
Honestly they were Super responsive and very reasonably priced. My grandsons broke the trolley off the door track. Jeremiah was here 2 hours after and only took a few minutes to replace the broken part. Very professional service and prompt. Thanks again for your honesty
Jul 20, 2016
Los Angeles Garage Door Maintenance Service did a great job upgrading our large 12'x12' warehouse overhead door. The maintenance men were very respectful, curtious and clean. They also were very good about communicating when they would be on site and worked with to be convenient to our schedule. When done they did a thorough cleaning of the work area. When we left I had a flat tire and one of the installers helped me deal with my flat tire. I would recommend and use them again
Jul 20, 2016
The garage door cables service was quick easy and well priced. Both of the techs were very friendly and were in an out within the hour. Thanks for your help! Will keep you in mind for any future repairs our garage doors may need. I will recommend your company to friends in the future. Thanks again!
Jul 20, 2016
I will continue to use them!
The second visit, we had to replace the garage door opener. They re-wired the whole thing which included replacing the wired opener in the garage and a new remote opener. They were so sweet, they also programmed both our cars. I will continue to use them, always courteous, timely and good prices.
Jul 20, 2016
Best garage door company in town!
I was already frustrated with my previous repair company when i came cross these Friendly, professional, effective, and reasonably priced guys. They've already worked on two of my businesses. I HIGHLY RECOMMEND them for repairs on your commercial garage door openers!
24HR Emergency Garage Door Repair Services – Call (818) 650-9988 to get service within 45 minutes OR less!
WHY CHOOSE OUR GARAGE DOOR REPAIR COMPANY?
✓ Locally Owned & Operated
✓ Over 15 Years of Experience
✓ Quality Workmanship
✓ Competitive Pricing
✓ Same-Day Emergency Repairs
✓ Best Products Available
✓ Licensed, Bonded and Insured
✓ Top-Rated Service on Yelp
✓ Pristine Record with the BBB
✓ Commercial Property Services
✓ Residential Gate Repairs
✓ Angieslist Service Awards
✓ Recommended by Contractors
✓ 100% Customer Satisfaction
✓ Personal 1 on 1 Attention
Top 12 Questions to Ask a Los Angeles Garage Door Company
Before you hire any Los Angeles garage door service there are some crucial qualifications you should ask about. Start with the list below and add to it as new issues arise:
• What kind of contractor license do the garage door contractors hold?
• How long have the garage door companies been in business in Los Angeles County?
• Do the garage door installers have any references in LA County that you may contact?
• How long should the garage door installation or garage door repair take?
• Do the garage door contractors carry workers’ compensation and liability insurance?
• Will the garage door companies provide a written estimate?
• How do the garage door repair companies price the work?
• What type of warranty do the companies provide on garage door parts and labor?
• Will permits be needed? If so, will the garage door companies get them for you?
• Do the garage door contractors do the work or do they hire subcontractors?
• How and when do the garage door repair companies clean up?
• Will the garage door contractors provide a written contract?
- Astragal: Astragal is the weather-stripping that runs along the bottom of a garage door, stopping any drafts or rain from entering inside the garage.
- Back Hangs: Back hangs are the vertical supports that hold the horizontal track in place, and stop the door from moving around in the track.
- Backroom: Backroom refers to the amount of space required to install a garage door, and is measured from the door to the rear of the horizontal track.
- Bottom Bracket: There are 2 bottom brackets, or corner brackets, on a garage door – one on the right, and one on the left. The lifting cables are attached to the bottom brackets on most sectional garage doors.
- Bracket-Mounted Tracks: Sometimes, a vertical track is attached to a doorjamb with angle brackets. This is referred to as a bracket-mounted track.
- Cable Drums: Cable drums are an essential part of a tension spring system. As the garage door opens, the lifting cable winds around the grooves in the cable drum. It keeps the lifting cable in line, so it doesn’t get tangled.
- Cable Safety Device: A cable safety device stops the garage door from falling if the cable happens to breaks.
- Cable-Stop: A cable stop is another safety device, attached to the end of the cable, that prevents it from slipping through the drum itself.
- Cable: The cable, or lifting cable, connects the bottom bracket to the counterbalance mechanism.
- Center Hinge: The center hinge is a flat hinge mounted on the door section that allows it to negotiate the curve between the vertical and horizontal tracks.
- Center Support Bearing: The center support bearing is mounted in the middle of, and above, the door, supporting the spring shaft.
- Clearances: You’ll need to know your clearances before you start your garage door installation. That refers to how much backroom, headroom and side room, or the distance around the walls of the garage, is needed to efficiently install your door.
- Curtain: The curtain refers to the face of the door that goes up and down, or side-to-side.
- Cycle: One cycle of a garage door goes from when it’s fully closed, to fully open, and then back again to fully closed. Torsion spring doors are rated by how many cycles they’re supposed to safely complete in their lifetime, for example 25,000, 50,000 or 100,000 cycles.
- Dead Loads: A dead load refers to a load that doesn’t move, like a garage door as it rests in the closed position.
- Garage Door Frame: The door frame holds the garage door with two vertical pieces and a horizontal header, or top piece.
- Door-Movement: Door movement refers to how much room a door has to lift in relation to the inside measurements of the garage. Door movement may be standard lift, full vertical lift, high lift, or low headroom.
- Door Size: When specifying a door size, you give the width first and, then the height.
- Double-Thick Glass: Double-thick glass is approximately 1/8” thick.
- Extension Springs: Extension springs are one of the 2 types of spring-systems used to carry the weight of a garage door as it lifts. They stretch on either side of the door, running from a pulley attached to the door, to the rear track hanger.
- Flag Bracket: A flag bracket connects the vertical & horizontal tracks.
- Flush Design: A garage door with a flush design is flat, with no indentations or grooves of any kind.
- Galvanizing: Galvanizing is the process of coating steel to prevent rusting as time goes by. All steel garage doors are galvanized.
- Garage Door Opener: Garage door openers consist of all the hardware that combines to open and close a garage door. A garage door opener can be operated automatically by remote control.
- Garage Building Plans: Garage building plans consist of all the garage blueprints and designs that, when followed carefully, will produce the garage of your dreams.
- Garage Door Screens: Garage door screens are similar to any regular screen door, but they’re big enough to fit in the opening of a garage door, keeping out bugs and dust.
- Gauge: Gauge refers to the thickness of steel. The higher the number, the thinner the steel is.
- Hinges: Hinges are used to connect the sections of a garage door, allowing the door to bend as it runs up the vertical track and onto the horizontal track.
- Horizontal Track: The horizontal track runs parallel to the garage’s ceiling, and supports and guides the door as it reaches its fully-open position.
- Insulation: The insulation in a garage door can be made of polystyrene foam or polyurethane filler. Polyurethane insulates better than polystyrene, but polystyrene lasts longer.
- Jamb Seal: The jamb seal is the weather-stripping that runs around the door jamb, stopping drafts and rain from entering the garage.
- Jambs: The jambs are the vertical pieces on either side of a garage door frame.
- Lift-Handle: A life handle is sometimes installed on a non-motorized garage door for use if manual operation is required.
- Lites: Lites are the industry’s word for glass or clear plastic windows in a frame. Some lites are double-glazed for insulation.
- Low Headroom: If your garage ceiling is lower than normal, you may need special low-headroom track hardware accessories and parts.
- Opening Size: The opening size refers to the distance between the walls and the doorjambs in a garage door opening.
- Overhead Garage Doors: An overhead garage door is one that’s built in hinged sections, allowing it to travel up and down tracks as it opens and closes.
- Panel: A panel refers to one section of a door.
- Perimeter Seal: A perimeter seal kit includes enough weather-stripping to completely surround a garage door.
- Photoelectric Sensor: Photoelectric sensors are required by law for safety reasons. They’re mounted 6” above the ground in the doorway, and will reverse the direction of the door if it hits an obstruction.
- Pneumatic Sensing-Edge Kit: A pneumatic sensing edge kit serves the same purpose as a photoelectric sensor. It consists of an air hose that runs along the bottom of the garage door that’ll reverse the direction of the door if it comes into contact with an obstruction.
- Portable Garage: Portable garages are made of UV-resistant and fire-retardant tarps or plastic sheets supported by metal tubing, that’ll house oversize items, like boats or RVs.
- Radius: The radius is the curved part of a track between the vertical and horizontal pieces.
- Rain Stop: A rain stop, or water stop, is a piece that runs across the garage floor, and holds the door flush against the outside finish when it’s closed.
- Rear Track Hangers: Rear track hangers attach the horizontal track to the ceiling, thus stabilizing it.
- Roller Assembly: The roller assembly consists of an axle with a wheel attached, that runs up and down the track.
- Rollers: The rollers are the wheel part of the roller assembly that roll freely using ball-bearings.
- Safety Spring Containment: Safety spring containment is a system found in extension springs, whereby cables run through the inside of the coil, holding it in place in case it breaks, to avoid injury.
- Sectional Garage Doors: Sectional doors are just that – doors made up of sections hinged together, thus allowing it to bend around the track as it opens and closes.
- Shaft Bearings: Shaft bearings support the weight of the counterbalance system against the weight of the door.
- Side Room: Side Room is a measurement you need when you’re figuring out what size door system you need. It represents the distance from the door, back to the closest obstruction.
- Spring Assembly: The spring assembly is the hardware that transfers the weight of the door to the counterbalance system.
- Stop-Molding: The stop molding is the wooden or plastic piece that’s attached to the outside of the door jamb, to seal out weather and light.
- Top Header Seals: The top header seal is the piece of weather-stripping that runs along the top of the garage door.
- Torsion Spring Counterbalance Assembly: The torsion spring counterbalance assembly is all the hardware that combines to evenly distribute the weight of the garage door as it opens and closes.
- Torsion Springs: Torsion springs are another type of spring systems that help in raising and lowering a garage door. They’re mounted above the door, and are loosened and tightened by the cables as they wind around the drum when the door is opened and closed.
- Winding Sleeves: The winding sleeves are the hardware that convert the tension as it enters the tension spring, thus distributing it into a manageable weight for the spring system.
- Wind Load: Wind Load refers to the force of the wind as it hits a garage door in the closed position. In hurricane or high-wind areas, doors are required to carry up to 110 mph wind load resistance!